Skip to main content

Galaxy operator

Galaxy operator deals with the rough or window polished diamond. This machine will map the diamond, make them transparent and auto plot inclusions inside them. This will make life easy for the planner or any other person to see the inclusions on the screen under high magnification

This task is performed because of following reasons:
  • Too many inclusions
  • Not sure position of inclusions of inclusions
  • Multiple bubbles
  • Deep grooves
  • Frosted or coated skin




Responsibilities:

  • Check every parcel have diamond when receiving parcels from stock controller
  • Check weight of diamond in weighing scale and confirm if it matches with the current weight mentioned in the parcel
  • Consumables, tools and equipment are available and in good condition
  • Calibration is mandatory everyday in the morning before production
  • Cover your Galaxy machine and shut down machine with technician help when going for long holidays
  • Ensure the aircon in the room is always on 18°-21°C
  • Ensure your room is clean and tidy before knocking off for the day

Consumables, tools and equipment:

  • 0.5 Marker pen
  • Pre cleaning liquid
  • Post cleaning liquid
  • 6 beakers
  • RO purifier
  • Ultra sonic cleaning machine
  • Hair dryer
  • Tap for water flow
  • Whitener
  • Whitener thinner and whitener cleaning liquid
  • Tweezer
  • Pots in all sizes
  • 10X or more magnifier loupe
  • Apron or dust coat
  • Regular pen and book to note down any instruction from monitor or supervisor
  • Cloth for cleaning
  • Weighing scale
  • Gal Manager
  • Safety clothes
  • Diaexpert eye or similar with their tools(Stages, lens, etc)
  • Galaxy machine

Calibration:

  • Everyday in the morning you need to put cleaning process of 25-30 minutes atleast. This is called degassing
  • Check if the screen is clean
  • If not continue for few more minutes
  • Screen need to be clear so that the planner or anyone can see the inclusions clearly

Comments

Post a Comment

Popular posts from this blog

Tools and equipment

Crafting of diamond need tools and equipment to polish a rough diamond to a jewelry diamond starting from import into factory to export. Technology has grown enormously in 21st century where you put a sawn (cut) diamond in a machine and get jewelry diamond in few hours. Lets start from the history.      History:      Diamonds were used to cut diamond rubbing against each other. In 15th century, tools were invented and among them Scaif is the best invention by Lodewyk Van Berken. Scaif is a polishing wheel infused with a mixture of olive oil and diamond dust. Diamonds are put in contact to scaif which rotates at 3000rpm. This helps polishing the diamond. The time taken to polish has drastically reduced at higher quality. Polishing tangs have been introduced to hold diamond when you put the diamond in contact to scaif.     TOOLS & EQUIPMENT       1. Galaxy machine:     Product of Sarin that makes the diamond surface tran...
Post a Comment
Read more

Window polisher

Polisher deals with the rough diamond. Follow planners' pen marking to polish and return back to the planner/ section monitor/ section supervisor. This task is performed because of following reasons: Surface of the diamond is frosted or coated Inclusions are clearly visible though the surface is clear Understand depth of inclusions To confirm inclusion type or nature To confirm the clarity Responsibilities: Check every parcel have diamond when receiving parcels from stock controller Check weight of diamond in weighing scale and confirm if it matches with the current weight mentioned in the parcel Be sure that you fully understand pen marking by the planners Consumables, tools and equipment are available and in good condition Opening the scaif should be done just before shift end so that you are ready for tomorrow Cover your scaif and oil your tang when going for weekend or holidays Ensure your polishing mill is clean and tidy before knocking off for the day Scaif have to be balance...
Post a Comment
Read more

Bottom polisher

Follows finishing supervisor instructions written in parcel to polish and return back to the finishing supervisor. They will confirm if polisher polished according to the instructions and the diamond need anything more to be polished and then send it to the section QC for polish and symmetry quality check. This task is performed because of following reasons: Ensure parameters, polish and symmetry are met as per rough estimations Finalize the bottom Responsibilities: Check every parcel have diamond when receiving parcels from stock controller Check weight of diamond in weighing scale and confirm if it matches with the current weight mentioned in the parcel Be sure that you fully understand finishing supervisor instructions written in parcel Consumables, tools and equipment are available and in good condition Opening the scaif should be done just before shift end so that you are ready for tomorrow Cover your scaif and oil your tang when going for weekend or holidays Ensure your polis...
Post a Comment
Read more
☌