Skip to main content

Bruting operator

Bruting operator deals with the rough polished or laser sawn diamond. There are different bruting machines available in the market and among them the following are most often used:

  1. EOS bruting machine
  2. Discron bruting machine

This task is performed because of following reasons:

  • Create roundness
  • Girdle percentage
  • Remove or reduce naturals in girdle region




Responsibilities:

  • Check every parcel have diamond when receiving parcels from stock controller
  • Check weight of diamond in weighing scale and confirm if it matches with the current weight mentioned in the parcel
  • Consumables, tools and equipment are available and in good condition
  • Machine checkups are mandatory everyday in the morning before production
  • Cover your machine when going for long holidays
  • Ensure your room is clean and tidy before knocking off for the day

Consumables, tools and equipment:

  • 0.5 Marker pen
  • Water
  • Black permanent marker
  • Pots (Male and female) in all sizes
  • 10X or more magnifier loupe
  • Apron or dust coat
  • Regular pen and book to note down any instruction from monitor or supervisor
  • Cloth for cleaning
  • Weighing scale
  • Allen keys
  • Hammer
  • Rench
  • Coolant for HRD bruting machine
  • Bruting machine

Machine checkups:

  • Check scaif quality for any cracks or holes on them
  • Check the screws of scaif are tightened
  • Check the movement of scaif from left to right and vice versa. Similarly from top to bottom
  • Check other buttons on the machine if they are working
  • Check for any machine vibration when the scaif is in full speed

Comments

Post a Comment

Popular posts from this blog

Tools and equipment

Crafting of diamond need tools and equipment to polish a rough diamond to a jewelry diamond starting from import into factory to export. Technology has grown enormously in 21st century where you put a sawn (cut) diamond in a machine and get jewelry diamond in few hours. Lets start from the history.      History:      Diamonds were used to cut diamond rubbing against each other. In 15th century, tools were invented and among them Scaif is the best invention by Lodewyk Van Berken. Scaif is a polishing wheel infused with a mixture of olive oil and diamond dust. Diamonds are put in contact to scaif which rotates at 3000rpm. This helps polishing the diamond. The time taken to polish has drastically reduced at higher quality. Polishing tangs have been introduced to hold diamond when you put the diamond in contact to scaif.     TOOLS & EQUIPMENT       1. Galaxy machine:     Product of Sarin that makes the diamond surface tran...
Post a Comment
Read more

Window polisher

Polisher deals with the rough diamond. Follow planners' pen marking to polish and return back to the planner/ section monitor/ section supervisor. This task is performed because of following reasons: Surface of the diamond is frosted or coated Inclusions are clearly visible though the surface is clear Understand depth of inclusions To confirm inclusion type or nature To confirm the clarity Responsibilities: Check every parcel have diamond when receiving parcels from stock controller Check weight of diamond in weighing scale and confirm if it matches with the current weight mentioned in the parcel Be sure that you fully understand pen marking by the planners Consumables, tools and equipment are available and in good condition Opening the scaif should be done just before shift end so that you are ready for tomorrow Cover your scaif and oil your tang when going for weekend or holidays Ensure your polishing mill is clean and tidy before knocking off for the day Scaif have to be balance...
Post a Comment
Read more

Grains

Grains play a vital role in manufacturing diamond in terms production and quality. If the diamonds are not polished in proper direction will impact the time taken to polish it and might lead to damage of diamond none tension What are grains and its basic knowledge:     Grains are arrangement of fibers in a material. Diamonds have grains like any other material.  If you can crack open the knowledge of grains in diamond then you can be highly skilled polisher or planner. Before we understand grains in diamond lets understand grains in wood.      Wood can be cut from any direction where few directions are easy and others are difficult(rarely impossible). It is very easy to cut the wood along the grains and very difficult cutting across grains. So when you are cutting wood using hand saw blade, you will first find the grains and then cut it along. Similarly, we need to know the grains before cutting or polishing the diamond. Below is a 3D image of diamond ...
1 comment
Read more
☌